1/17/2024 0 Comments Easytime wood refinishingIf you do have wax, you still don’t have to sand it down for a clean and shiny finish. Chances are if your floor’s finish was applied before the 1970s (before polyurethane was used as a sealant), your floor is coated with wax, old-fashioned varnish, or shellac. But if any brown or shiny residue comes off, you have wax. But what are mineral spirits? They’re actually a petroleum-derived clear liquid solvent you can get at a home improvement store.Īfter a few minutes, wipe the solution with a clean white rag. Find a spot that doesn’t have a lot of wear, like a corner or behind a door, and drop some mineral spirits as a test. Is worn, wax will remain in areas that have low foot traffic. Unfortunately, if your floor has any kind of wax on it, the new finish won’t bond. Why? Laminated floors (either glue-down or floating) only have a thin layer of attractive wood veneer over plywood, so you can’t sand these floors more than twice without damaging them and exposing the plywood.Īs for traditional hardwoods, forgoing the sanding method saves you a lot of time, energy, and money (from tool rentals like sanders and a professional grade vacuum). Though you can sand your traditional hardwoods, it’s difficult or even impossible to sand prefinished or laminated wood floors. Whether you have traditional hardwoods, prefinished wood, or laminated wood, restoring without sanding is a practical solution. Refinishing Prefinished and Laminated Hardwood Floors Different floor materials or treatments will have an impact on how you are able to refinish your floors, and you want to make sure you take the best and most effective approach. This is especially important if you’re not the original owner. Figure Out What Kind of Hardwood Floors You’re Working Withīefore you dive into any DIY home project, it’s important to know the materials you’re working with. Read along to find out if this is the best way to renew or restore your floors. Pro tip: When you make the decision to touch up your floors yourself, it’s best to do it between tenants-that way, you’re not moving furniture in and out, nor are you forcing your residents to relocate for 48 hours. Buff and recoat floors with polyurethane.Use a store-bought chemical abrasion kit.3 Approaches to Refinishing Hardwood Floors Without Sanding However, if the wear is fairly surface-level (normal wear, scratches in the finish and only a few deeper scratches that gouge that wood itself), it’s easy to refresh your hardwood floors in one day and save yourself from the mess, labor, and expense of sanding off your existing finish. Most property owners think that to get that new-again sheen they have to sand down their floors, restain them, and reseal them. Between tenant turnover (moved furniture), general wear and tear, and the presence of pets (if you allow them), it’s likely that after a few years of tenants, your once-sparkling floors are far from pristine and could probably use a touch up. The hardwood floors in your rental property take a beating.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |